Abstract
This paper reports the feasibility of using two Malaysian agricultural residues without modification; unmodified sugarcane bagasse (UMSCB) and unmodified coconut coir (UMCC) for the removal of Cd(II) from aqueous solution under different experimental conditions. Effect of various process parameters; contact time, initial metal ion concentration and pH have been studied. The maximum Cd(II) adsorption capacity was shown by UMSCB and UMCC are 5.322 and 5.870 mg/g respectively at 15 mg/L. Adsorption process was expressed by using Langmuir and Freundlich isotherms. Freundlich isotherm curves were found to be significant compared to Langmuir isotherm. Two simplified kinetic models were tested to investigate the adsorption mechanism. These results indicate that such bagasse and coir without modification could be employed as low cost adsorbents in waste water treatment for the removal of heavy metals.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.