Abstract
The catalytic effect of lime on the reduction of carbon-chromite composite pellets was investigated at 1270–1433°C under CO-argon atmospheres. It was found that the data for the early stage of reduction, up to a reduction level of 30–60%, fit both an exponential law for nucleation control and an equation for chemical control with an apparent activation energy ranging from 139 to 161 kJ/mol depending on the amount of lime addition. In the late stage (after about 65% reduction), solid diffusion of chromium in the oxide phase is the most likely rate-controlling step with an apparent activation energy of 410 kJ/mol. Besides the possibility of it being able to go into the spinel lattice and release the FeO, lime is also suggested to catalyse the chromite reduction through enhancing the nucleation and/or interfacial reaction in the early stage, and facilitating the solid-diffusion process in the late stage. The results of this study also indicate that heat treatment of chromite has a significant effect on the reduction kinetics.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.