Abstract

This study investigated the effects of desilication of ZSM-5 zeolite on its catalytic properties in catalytic fast pyrolysis (CFP) of lignocellulosic biomass. A series of mesoporous ZSM-5 zeolites were prepared by desilication of a conventional microporous ZSM-5 zeolite with NaOH solutions of varying concentrations (0.1–0.5M). The creation of mesopores improved the diffusion property of the desilicated ZSM-5 zeolites and their catalytic activity for cracking bulky oxygenates (e.g., syringols derived from the lignin component of biomass). Consequently, the desilicated zeolites produced more aromatic hydrocarbons (carbon yields of 26.2–30.2%) and less coke (39.9–41.2%) in CFP of beech wood than the parent microporous ZSM-5 (23.2% aromatics and 44.4% coke). The highest aromatic yield (30.2%) and lowest coke yield (39.9%) were obtained in CFP of beech wood with mildly desilicated zeolite treated with 0.3M NaOH solution. However, desilication with a greater concentration, 0.5M NaOH, decreased the aromatic yield to 26.2% due to a considerable loss of microporosity in the severely desilicated zeolite. The results indicate that carefully controlled desilication of zeolite can improve the conversion of lignocellulose to valuable aromatic hydrocarbons and decrease the formation of undesired coke, thus improving the product distribution in CFP of lignocellulose.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.