Catalytic Fast Pyrolysis of Biomass: Catalyst Characterization Reveals the Feed-Dependent Deactivation of a Technical ZSM-5-Based Catalyst

Abstract

Catalyst deactivation due to coking is a major challenge in the catalytic fast pyrolysis (CFP) of biomass. Here, a multitechnique investigation of a technical Al2O3-bound ZSM-5-based extrudate catalyst, used for the CFP of pine wood and cellulose (at a reactor temperature of 500 °C), provided insight into the effects of extrusion, the catalytic pyrolysis process, and catalyst regeneration on the catalyst structure. As a result of a reduction in acidity and surface area due to the coking catalyst, the activity dropped drastically with increasing time-on-stream (TOS), as evidenced by a decrease in aromatics yield. Strikingly, confocal fluorescence microscopy at the single-particle level revealed that vapor components derived from whole biomass or just the cellulose component coke differently. While pine-wood-derived species mainly blocked the external area of the catalyst particle, larger carbon deposits were formed inside the catalyst’s micropores with cellulose-derived species. Pyridine FT-IR and solid-state NMR spectroscopy demonstrated irreversible changes after regeneration, likely due to partial dealumination. Taken together with <30 g kg–1 aromatics yield on a feed basis, the results show a mismatch between biomass pyrolysis vapors and the technical catalyst used due to a complex interplay of mass transfer limitations and CFP chemistry.