Carbonation Characteristics and Bearing Capacity Attenuation of Loaded RC Beam Coupled with Chloride Erosion

Abstract

The durability of a concrete bridge structure is a systematic problem composed of material, structure, natural environment, and service environment. Various factors are coupled, which affect each other, and single‐factor research cannot fundamentally solve this problem. In this paper, the carbonation characteristics of RC beams with different loading states under the coupling action of carbonation and chloride erosion are studied. Through the experiment, the author tries to find the influence of stress state and chloride ion erosion on the carbonation of concrete and analyze the failure mode and the attenuation rules of the flexural and shearing capacity of the corroded RC beams under the coupling action. For this purpose, five groups of experiments under different working conditions were designed, including chloride ion erosion and carbonation experiments without external load of the cubic blocks, and chloride erosion and carbonation coupling experiments of RC beams under different stress states and stress levels. The carbonation rate of concrete can be reduced by 56%∼60% under the coupling action of chloride salt. Different loading states and stress levels have an obvious influence on carbonation and chloride ion corrosion, which further affects the corrosion rate of steel bars. Under a low corrosion rate, the bending and shear failure modes of the corroded beams are similar to those of the noncorroded beams, and the section strain distribution still approximately conforms to the plane section assumption. The relationship between the relative ultimate shear strength or the relative ultimate flexural strength and the average section‐corrosion rate of the reinforcement is approximately linear.