Abstract
Compared to carbon nanotube-based Atomic Force Microscopy probes, carbon nanocone-based probes appear as promising candidates for investigating topography and mechanical properties thanks to the reduced number of artefacts. In this paper, we intend to investigate some of the mechanical features of carbon nanocone (CnC) tips and to evaluate their performances as probes for investigating the mechanical properties of polymer films and composites. Using their force distance curve, the cantilever/CnC spring constant of several CnC probes is determined and the related bending force for each cone is extracted. The results demonstrate CnC bending forces ranging from 100 nN up to 3 μN, which is up to 2 orders of magnitude higher than values reported in the literature for carbon nanotubes. Moreover, the bending phenomenon occurred only when the CnC axis was not strictly perpendicular to the substrate surface. Using Peak-Force Quantitative NanoMechanical (PF-QNM) mode, we demonstrate that CnC probes are suitable to accurately probe polymer mechanical properties, provided the same targeted deformation is used for both the calibration and PF-QNM measurements.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.