Abstract
The soil losses that are caused should be examined by monitoring the forest roads in the periods after they are built. In traditional soil loss determination studies that require intensive labour, due to difficulties in parcel setup, leaks from the connection points of the system, overflow of the material in the storage units and regular follow-up of the precipitation, etc., the system has its disadvantages. In this study, studies were carried out to evaluate the possibilities of using UAV and close range photogrammetry (CRP) methods, which are remote sensing techniques, and to determine the soil losses in forest road cut slopes in semi-arid mountainous areas. In addition, the advantages and disadvantages of the methods are discussed. A 100-m section of the secondary forest road was chosen as the study area. Data acquisition was carried out by UAV and CRP methods in the period of May 2020-November 2020. In the results of the study, the volumetric deformation per unit area results, a - 0.0060 m3m-2 erosion amount and a 0.0046 m3m-2 accumulation amount were determined by UAV. In addition, in the photogrammetric method, a - 0.0050 m3m-2 erosion amount and a 0.0031 m3m-2 accumulation amount were found. When both methods were compared temporally, the processes took approximately 2 times longer in the CRP method. In addition, while the ground sampling distance of DEMs and orthophotos produced with the UAV was 2cm, it was obtained as 1cm in the CRP method and terrestrial receptions were found to be 2 times higher resolution. According to the results obtained, the CRP method gives results that are more accurate in such studies.
Submitted Version (Free)
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.