Abstract
This study carries out the calibration and validation of Antenna Temperature Data Record (TDR) and Brightness Temperature Sensor Data Record (SDR) data from the last National Oceanic and Atmospheric Administration (NOAA) Advanced Microwave Sounding Unit-A (AMSU-A) flown on the Meteorological Operational satellite programme (MetOp)-C satellite. The calibration comprises the selection of optimal space view positions for the instrument and the determination of coefficients in calibration equations from the Raw Data Record (RDR) to TDR and SDR. The validation covers the analyses of the instrument noise equivalent differential temperature (NEDT) performance and the TDR and SDR data quality from the launch until 15 November 2019. In particular, the Metop-C data quality is assessed by comparing to radiative transfer model simulations and observations from Metop-A/B AMSU-A, respectively. The results demonstrate that the on-orbit instrument NEDTs have been stable since launch and continue to meet the specifications at most channels except for channel 3, whose NEDT exceeds the specification after April 2019. The quality of the Metop-C AMSU-A data for all channels except channel 3 have been reliable since launch. The quality at channel 3 is degraded due to the noise exceeding the specification. Compared to its TDR data, the Metop-C AMSU-A SDR data exhibit a reduced and more symmetric scan angle-dependent bias against radiative transfer model simulations, demonstrating the great performance of the TDR to SDR conversion coefficients. Additionally, the Metop-C AMSU-A data quality agrees well with Metop-A/B AMSU-A data, with an averaged difference in the order of 0.3 K, which is confirmed based on Simultaneous Nadir Overpass (SNO) inter-sensor comparisons between Metop-A/B/C AMSU-A instruments via either NOAA-18 or NOAA-19 AMSU-A as a transfer.
Highlights
The European Meteorological Operational satellite program C (Metop-C) satellite, which was launched into low Earth orbit on 6 November 2018, carries the last National Oceanic and Atmospheric Administration (NOAA) Advanced Microwave Sounding Unit-A (AMSU-A)
The European Meteorological Operational satellite program C (Metop-C) satellite, which was launched into low Earth orbit on 6 November 2018, carries the last NOAA Advanced Microwave Sounding Unit-A (AMSU-A)
Intensive calibration activities for the AMSU-A Raw Data Record (RDR) to derive Earth antenna Temperature Data Record (TDR) data have been conducted in the NOAA Center for Satellite Applications and Research (STAR) [1,2,3,4]
Summary
The European Meteorological Operational satellite program C (Metop-C) satellite, which was launched into low Earth orbit on 6 November 2018, carries the last NOAA Advanced Microwave Sounding Unit-A (AMSU-A). The sufficient calibration and validation of Metop-C AMSU-A data becomes very necessary to ensure the accuracy of the data Another important parameter that could affect the performance of AMSU-A observations is the instrument noise [18,19], i.e., Noise Equivalent Differential Temperature (NE∆T or NEDT), which represents the smallest temperature difference that an instrument can distinguish when looking at Earth scenes. Inter-sensor comparisons are further given of AMSU-A antenna temperatures between Metop-C and each of Metop-A and Metop-B AMSU-A instruments These are performed by using each of the NOAA-18 and NOAA-19 AMSU-A instruments as a transfer based on the existing Simultaneous Nadir Overpass (SNO) method [24] and some proper quality schemes applicable for microwave satellite measurements at surface-sensitive channels [25,26]. The final section summarizes the overall Metop-C AMSU-A calibration and validation results
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
