Calculation of Aerodynamic Noise for Centrifugal Fan of Air-Conditioner

Abstract

Flow fields in a centrifugal fan for an indoor unit of an air-conditioner were calculated with finite element method-based large eddy simulation (LES) with the aim of predicting fan performance and aerodynamic noise in this study. The numerical simulation code employed throughout the LES was called FrontFlow/blue (FFB). We compared 10M grid [coarse grid] and 60M grid [fine grid] calculation results for investigation of influence of grid resolution. In the fine grid, the number of grid elements in blade-to-blade direction, and of region between the shroud and the bell mouth increased in particular. By calculating with the fine grid, calculated distributions of absolute velocities at blade exit reasonably agreed with experimental results. Because of this, maximum absolute velocity by fine grid near hub decreased as compared to those by coarse grid. Calculated sound pressure level by fine grid was therefore smaller than that by coarse grid, and the overestimation of sound pressure was suppressed by calculating with fine grid. This decrease of the absolute velocity was a first factor for the improvement of calculation accuracy. Moreover, number of captured streaks on the blade, hub, and shroud surfaces by fine grid increased as compared to those by coarse grid. As a result, size of streak by fine grid became smaller than that by coarse grid. Static pressure fluctuations by fine grid on the blade, hub, and shroud surfaces therefore reduced as compared to those by coarse grid. Aerodynamic noise was related to static pressure fluctuations according to Curle’s equation. This reduction of static pressure fluctuations was therefore a second factor for improvement of calculation accuracy.