Abstract
AbstractThe amount of early ettringite crystallization is known to influence the rheology of cementitious materials. It is dependent on various factors, e.g., the reaction temperature, the chemical composition of the cement and the amount of PCE. In this study, we investigate the rheology and reactivity of synthetic model cements with different contents of C3S, C3A and β‐hemihydrate (β‐HH). Their reactivity is studied using in‐situ calorimetry and their rheology is studied using a rotational rheometer. Our results demonstrate that higher C3A contents in the clinker increase the early heat release of the cements which is associated with an increased formation of ettringite. Increased C3A contents from 2.5 wt.% to 12.5 wt.% enhance the early heat by four orders of magnitude. The static yield stress of the different cement pastes was determined with an oscillation based rheometry method 17 minutes after contact with water. Interestingly, the static yield stress increases exponentially with the heat of hydration. These findings have implications for the understanding of OPC hydration, as well as for chemical optimization and the design of OPC‐based materials.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.