Building Materials Effects of Al Content and Physical Properties on the Electromagnetic Interference Shielding of Sn Based Coating Thin Layers

Abstract

This study coats complex colloid mixed with Sn-xAl powders and polyethylene on glass to examine the shield effect on electromagnetic interference (EMI). In addition, the sputtering specimens and powder coating specimens were compared. The results show that adding Al to the Sn-xAl powders can increase the electromagnetic interference (EMI) shield at lower frequencies. Notably, the number of cavities in the coating layer increased with the coating thickness, with the result that the EMI shield could not improve with an increase in the coating thickness at higher frequencies. However, the EMI shield of sputtering films had a tendency to increase as the thin thickness increased. The Sn-40Al undergoes a dispersing effect which forms a fine overlapping structure, thereby improving the low frequency EMI shielding. In addition, the Sn-20Al powders possessed the properties of a small particle size, closed structure and higher electric conductivity which improved the high frequency EMI shielding. For the sputtering films, the annealed treatment not only had higher electric conductivity but also increased the high frequency EMI shielding.