Buffering curves of ideal whey fractions obtained from a cascade membrane separation process

Abstract

Listen

Translate article

Skimmed milk was fractionated via a cascade system: Graphic plotting of microfiltration (MF); ultrafiltration (UF); nanofiltration (NF); and reverse osmosis (RO). The buffering curves of each fraction were studied over the pH range 4–7. Depending on their composition, the individual permeate streams showed different buffering capacity values and pH ranges where the buffering occurred. The concentration of active buffering substances in the permeates decreased (in mmol/L) from ~26.6 (MF) to ~17.4 (UF) to 1.39 (NF) to 0.07 (RO). Contributions to the total buffering capacity for MF permeate, which represents the serum phase of milk, were ~37% from whey proteins and ~63% from milk salts (especially citrates, phosphates and carbonates) including lactose and water.