Abstract
Cellulose triacetate (CTAB) synthesized by cellulose extracted from sugarcane bagasse, and commercial cellulose acetate (CA) were used to produce nanofiber membranes contained bromelain by electrospinning technique. About 1.3 g of cellulose acetate per gram of bagasse were obtained, and both CTAB and CA was characterized by analysis of Fourier Transform Infrared Spectroscopy (FTIR) and Differential Scanning Calorimetry (DSC). The nanofiber membranes were produced by electrospinning process testing the following conditions: voltage 25 kV, flow rate 4 mL/h and distance 10 cm, using acetone/ dimethylformamide (DMF) (85:15 m/ m) to 15% cellulose triacetate (70% CA + 30% CTAB) or CA solutions. Scanning Electron Microscopy (SEM) was used to nanofiber membranes characterization. Bromelain was immobilized on the nanofiber membranes by crosslinking with glutaraldehyde and directly in the electrospinning step, the highest activity recovery was about 675% and in vitro controlled release tests were performed to semi-quantitatively evaluate the release of the enzyme bromelain thus demonstrating complete release process in 3 days.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
