Abstract
Compact broadband circularly polarized elliptical slot antenna arrays (CPESAAs) are devised based on 2 × 2 and 4 × 4 circularly polarized (CP) elliptical slot antennas and a sequential phase feed network. To realize the circular polarization, eight rectangular stubs are embedded in the feed structure to excite two orthogonal E vectors in 2 × 2 CPESAA configuration. Moreover, by taking four rectangular slots out from each array element, return loss and axial-ratio bandwidths are noticeably increased. The investigated simple array element has a compact size of 20 × 20 × 1 mm3. As well, 2 × 2 CPESAA occupies a compact size of 55 × 60 × 1 mm3, which operates within the frequency band 4.18–9.35 GHz. Thus, 76.4% of S11< −10 dB and 51.4% of CP bandwidth (4.43–7.5 GHz) are covered. Moreover, proposed 4 × 4 CPESAA is printed on 110 × 110 × 1 mm3FR4 substrate and covers the frequency band of 1.15–12.98 GHz with CP at 2.95–8.82 GHz. Throughout the study, the design process of the proposed antenna arrays are presented and discussed in detail.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Microwave and Wireless Technologies
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
