Box–Behnken design-assisted optimization of RP-HPLC method for the estimation of evogliptin tartrate by analytical quality by design

Abstract

BackgroundA quality by design approach can potentially lead to a more robust/rugged method development due to emphasis on the risk assessment and management. By carefully understanding the step-by-step procedure for analytical QbD-based optimization parameters, such as analytical target profile and critical quality attributes (CQAs), was assessed. The present study describes the simple, rapid, sensitive and cost-effective RP-HPLC method development and validation for the estimation of evogliptin tartrate in pharmaceutical dosage form.ResultsThe factor screening studies were performed using Box–Behnken design by three key components of the RP-HPLC method (mobile phase, pH and flow rate). The chromatographic conditions were optimized with the Design Expert software trial version 13.0. The optimal chromatographic separation was achieved having water C18 column (250 mm × 4.6 mm, 5 μ) and using mobile phase as a methanol and phosphate buffer (pH 4.5) 60:40% v/v with a flow rate 1.0 ml/min and UV detection at 267 nm. The Box–Behnken experimental design describes the interrelationship of mobile phase, pH and flow rate at three different levels, and responses of retention time and tailing factor were observed with response surface plot and statistical data. The developed method was validated as per recommended ICH guidelines which revealed the high degree of linear, precise, accurate, sensitive and robust method over the existing RP-HPLC method for evogliptin tartrate.ConclusionThe developed QbD-based method helped in generating a design space and operating space with knowledge of all method performance characteristics, and RP-HPLC method takes less time and can be used in the industry for routine quality control of bulk and marketed formulation of evogliptin tartrate.