Abstract
The 11B/10B ratio exhibits wide variations in nature; thus, boron isotopes have found numerous applications in geochemistry, hydrology, and environmental studies. The main analytical techniques used are as follows: positive thermal ionisation mass spectrometry is the most precise (about 0.2‰ of the boron isotope ratio), but requires complex and laborious sample preparation; negative thermal ionisation mass spectrometry is less precise (about 0.5‰), but rapid and suitable for water samples, whereas total evaporation-NTIMS allows for identification of the precise boron isotope composition of marine carbonates. It is expected that multi-collection system inductively coupled plasma mass spectrometry (MC-ICPMS) will eventually combine high precision with simple analytical procedures. Secondary ion mass spectrometry and laser ablation (LA)-MC-ICPMS allow in situ determinations on solid samples, but require the availability of calibration materials which are chemically and mineralogically similar to samples. These features of boron isotope measurement techniques were confirmed by the results of the first inter-laboratory comparison of measurements, organised by the Istituto di Geoscienze e Georisorse in Pisa. Finally, two examples of boron isotope applications in groundwater investigations are reported. †Updated paper: originally presented on the IAEA International Symposium “Quality Assurance for Analytical Methods in Isotope Hydrology” (August 2004, Vienna).
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call