Boosting electrochemical performance by regulating rigid-flexible microphase separation of multiblock copolymers

Abstract

The growth of lithium dendrites and associated safety issues hinder the further development of liquid lithium metal batteries. A novel rigid-flexible multiblock copolymer PBC-mb-PBS was successfully synthesized based on molecular design. Incorporating crystalline rigid phase polybutylene succinate (PBS) into PBC-mb-PBS significantly enhances its tensile strength and low-temperature toughness through physical crosslinking. The flexible polydibutyl 2-(2-cyanoethyl)malonate (PBC) phase with side-chain cyano groups facilitate ionic conduction, forming a LiN-rich stabilized interfacial layer, thereby improving oxidative stability and high-voltage cathode compatibility. A series of multiblock copolymers with varying segment lengths were synthesized to balance mechanical properties and ionic conductivity by adjusting microphase separation. The quasi-solid-state polymer electrolyte (QSPE), derived from PBC-mb-PBS with the molar block ratio of 0.42, exhibits optimal electrochemical performance with ionic conductivity of 6.20 × 10−5 S cm−1 at 30 °C and 4.22 × 10−4 S cm−1 at 60 °C. Due to its bicontinuous microphase structure, it also shows excellent mechanical strength and promotes uniform lithium deposition at high current densities. Li//LiFePO4 and Li//LiNi0.83Co0.05Mn0.12O2 cells demonstrate high capacity retention, confirming the potential of this polymer electrolyte in high-voltage applications. This design strategy offers insights for developing quasi-solid-state lithium metal batteries with superior overall performance.