Boosting corrosion resistance of Mg-Li alloy: Implanting bioinspired superhydrophobic surfaces into MAO matrix for enhanced protection

Abstract

Listen

Translate article

The corrosion problem has significantly impeded the practical application of Mg-Li alloys. In this report, a method that combines micro-arc oxidation (MAO) with electrochemical deposition is developed to create a superhydrophobic matrix on Mg-Li substrate. The combination approach harnesses the superiority of both coverages, including MAO as the dense, firmly bonded ceramic oxide layer on the metal substrate and the superhydrophobic surface (SHS) implanted into MAO matrix. The MAO-SHS coating exhibits high mechanical stability, maintaining the superhydrophobicity due to the “implanting effect” even after a long distance of friction effect. For corrosion inhibition, compared to the bare Mg-Li with icorr of 9.26 × 10−5 A/cm2, the icorr for MAO and MAO-SHS is 7.83 × 10−6 A/cm2 and 7.50 × 10−9 A/cm2, respectively, representing the reduction of approximately one and four orders of magnitude. Focusing the atmospheric corrosion inhibition, MAO-SHS proves to manipulate the dynamic evolution of saline solution evaporation and salt particle deliquation. The salt particle crystalized from saline solution on MAO-SHS is found to have significantly smaller contact area than that of the bare Mg-Li and MAO. By employing atomic force microscopy, the adhesion force of salt particle is revealed as ca. 45 nN, 13 nN, and 2 nN for salt particle on Mg-Li, MAO, and MAO-SHS, respectively. This suggests that the salt can be more easily removed from the MAO-SHS surface, thereby reducing the susceptibility to corrosion. The in situ deliquation is conducted to understand the formation of the droplet on different surfaces. The air in the SHS layer hinders chloride ingress and the SHS layer seals the pores in MAO layer, proving the synergistic effect afforded by MAO-SHS to achieve superior corrosion resistance.