Bond strength of resin-based restorative materials to fast-setting calcium silicate cement using different resin adhesive systems.

Abstract

This study assessed the bond strength of resin-based restorative materials to fast-setting calcium silicate cement (Aarhus Uinversity, Denmark) when treated with each of two one-bottle universal adhesive systems. The cement surface (N=256) was treated with a self-priming adhesive and a self-etch phosphate monomer-containing adhesive with and without etching of the cement surface. Specimens then received either resin composite or compomer restorative materials (n=32). The bond strength was measured after 1 day and 1500 thermocycles (n=16). The failure type was visually inspected. The cement-adhesive-restorative material interface was visualized using scanning electron microscopy (SEM). The data were analyzed using multiple linear regression. Restorative material type, resin adhesive system, and thermocycling had a statistically significant effect on the bond strength. Compomer restorative material and self-etch universal adhesive system demonstrated statistically significantly higher bond strength values to fast-setting calcium silicate cement, predominantly exhibiting cement cohesive failure. Etching the cement surface enhanced the bond strength of the self-priming universal adhesive. Thermocycling significantly reduced the bond strength. SEM showed self-etch universal adhesive seemingly diffused over the etched cement surface compared to other groups. Self-etch phosphate monomer-containing universal adhesive and compomer resulted in the highest bond strength to fast-setting calcium silicate cement.