Abstract
Fabrication method of a fiber optic electric field sensing probe using polarization maintaining fiber (PMF) is described including a birefringent axes aligning system. The sensing probe is basically a fiber-coupled Fabry-Perot resonator where a thin birefringent wafer of LiTaO <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sub> with an external cavity is mounted onto the end of PMF. An optical wave from a superluminescent laser diode after a linear polarizer parallel to the slow axis of the PMF is made to enter the LiTaO <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sub> crystal with polarization parallel to its extraordinary axis and the reflected optical wave is detected after passing through a polarization analyzer. By measuring a minimum value of a ratio of the reflected optical power at 90° to that of 0° of analyzer, we successfully demonstrated that the angular accuracy of the slow axis of the PMF with respect to the extraordinary axis of the LiTaO <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sub> can be evaluated. Aligning both axes precisely, the electro-optic effect associated with LiTaO <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sub> and polarization is optimized with greater stability. Long term stability of the fabricated PMF sensing probe was enhanced by about 3 times compared to that of a conventional single mode fiber one. As a result of uncertainty analysis, the method we proposed has an overall angular uncertainty of 1° when the used fiber optic components have polarization angle tolerance of 1°.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call