Abstract

BackgroundAdjacent segment degeneration (ASD) is a common complication of lumbar interbody fusion; the paraspinal muscles significantly maintain spinal biomechanical stability. This study aims to investigate the biomechanical effects of proximal multifidus injury on adjacent segments during posterior lumbar interbody fusion (PLIF).MethodsData from a lumbosacral vertebral computed tomography scan of a healthy adult male volunteer were used to establish a normal lumbosacral vertebral finite element model and load the muscle force of the multifidus. A normal model, an L4/5 PLIF model (PFM) based on a preserved proximal multifidus, a total laminectomy PLIF model (TLPFM), and a hemi-laminectomy PLIF model based on a severed proximal multifidus were established, respectively. The range of motion (ROM) and maximum von Mises stress of the upper and lower adjacent segments were analyzed along with the total work of the multifidus muscle force.ResultsThis model verified that the ROMs of all segments with four degrees of freedom were similar to those obtained in previous research data, which validated the model. PLIF resulted in an increased ROM and maximum von Mises stress in the upper and lower adjacent segments. The ROM and maximum von Mises stress in the TLPFM were most evident in the upper adjacent segment, except for lateral bending. The ROM of the lower adjacent segment increased most significantly in the PFM in flexion and extension and increased most significantly in the TLPFM in lateral bending and axial rotation, whereas the maximum von Mises stress of the lower adjacent segment increased the most in the TLPFM, except in flexion. The muscle force and work of the multifidus were the greatest in the TLPFM.ConclusionsPLIF increased the ROM and maximum von Mises stress in adjacent cranial segments. The preservation of the proximal multifidus muscle contributes to the maintenance of the physiological mechanical behavior of adjacent segments, thus preventing the occurrence and development of ASD.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call