Biomechanical analysis of different fixed dental restorations on short implants: a finite element study.

Abstract

Although the use of short implants is becoming more common for patients with atrophic alveolar ridges, their use is still quite limited. This is due to the lack of data of long-term survival compared to standard-length implants. The aim of this study was to determine the load in the bone and implant system with different superstructures. Three kinds of prosthetic restorations were created on short implants based on CT-Data. Two short implants with different macro-geometries were used. The implants were inserted in idealised posterior lower mandibular segments and afterwards restored with a crown, a double splinted crown, and a bridge. The analysis was performed under load of 300 N either divided between a mesial and distal point or as a point load on the pontic/mesial crown. The different design of the implant systems had a noticeable influence on the stress in the cortical bone, in the implant system, and the displacement of the superstructure as well. Compared with implants of standard length, higher stresses were observed, which can lead early failure of the implant during the healing period or a late cervical bone resorption. Precise indications are essential for short implants to avoid the failure of short implants.