Abstract
The wet granulation process was used to prepare new, efficient, and cost-effective granular biomass-based composite catalysts for catalytic wet peroxide oxidation (CWPO) of bisphenol A (BPA). The most stable composite granules was prepared by mixing biomass-based carbon residue (CR) with metakaolin (MK) combined with calcium oxide (CaO) or cement and a solvent (NaOH or KOH). For all the prepared composite granules, the optimized binding agents to carbon ratio was 0.3, the solvent to carbon ratio 1.2, and the agitation rate 1200 rpm. The specific surface area of the prepared catalysts was 152–205 m2/g. The composite granular catalyst (CR + MK + CaO + NaOH) had the most durable and stable structure (compressive strength of 27 N) and the most basic surface (15 mmol/g) measured with temperature programmed desorption. This catalyst was the most active in CWPO of BPA and total organic carbon removal of 50% and 48%, respectively.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
