Abstract
Intumescent coatings formulated with coconut fiber (CCN), wood waste (MDP), and peach stone (PEA) biomasses were tested. Different formulations with variable concentrations of biomasses were carried out. Fourier transform infrared (FTIR) and thermogravimetric analysis (TGA) confirm that lignin and cellulose are constituents of these compounds. Fire-resistance testing confirms the percentage of 9% in dry mass as the optimal amount of CCN and MDP, while 6% is ideal for PEA. IR thermal images show the thermal protection and high expansion on the intumescent coatings (600% for CCN9, 1300% for MDP9, and 1600% for PEA6) and corroborate the data of the thermocouple. The maximum temperatures on the back of the substrate were 120 °C with biomass-based intumescent coatings and 474 °C for uncoated steel. TGA and X-ray diffraction of the coatings confirm the formation of stable oxides. Optical microscopy images show the presence of pores in the char layer.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.