Abstract
Biosouring is commonly encountered during secondary oil recovery when seawater or another high sulfate water source is utilized for flooding; as a result, effective souring control is of great interest to the oil industry. Here we describe a laboratory study to evaluate the relative effectiveness of souring interventions through the injection of nitrate, chlorate and perchlorate, collectively (per)chlorate, solutions and whether in-situ galvanic potential measurements can be used for convenient and quantitative tracking of sulfide dynamics. Nitrate has typically been the chemical of choice for souring treatments, while the efficacy of (per)chlorate as a new candidate inhibitor has only been explored recently. (Per)chlorate is known to inhibit oil reservoir souring via mechanisms such as toxicity, bio-competitive exclusion and sulfur redox cycling. Two sets of experiments under different matrix and inoculation conditions were conducted to evaluate treatment efficiency under variable baseline physical and biogeochemical conditions. Our data demonstrated the sensitivity of the galvanic potential signals to sulfide concentrations where the sulfide-galvanic potential correlation is similar to the theoretical predictions based on the Nernst equation, demonstrating the feasibility of using galvanic potential as a quick and economical method for quantifying in situ sulfide concentrations for tracking reservoir souring processes and subsequent intervention effectiveness. Our results show that all three chemicals were effective at suppressing sulfidogenesis. A reactive transport model for perchlorate treatment was developed to simulate the reaction processes and explore the interactions between the underlying competing mechanisms of this inhibitor. A baseline simulation captured the temporal patterns of the effluent chemical species. Subsequent simulations in which individual inhibition mechanisms were systematically removed elucidated the relative role that each inhibition mechanism played at the different phases of the experiment. The simulation results complement the experimental findings. Our study supports the potential advantages of souring control with (per)chlorate treatments, and the application of galvanic signal as an economic, in-situ monitoring approach for tracking souring dynamics and treatment efficacy.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.