Abstract
Conventionally, polyurethane (PU) is derived from the non-renewable petroleum feedstocks, polyol polyester and di-isocyanate. Bio-based polyol polyester is an alternate to reduce the environmental impacts of the petroleum-based polyol polyester. Bio-based reactants, sorbitol (SL) and azelaic (AA) acid were used in the esterification to produce sorbitol azelaic acid ester (SAAE) using germanium (IV) oxide (GeO2) as a catalyst. The experimental studies set at various operating conditions were conducted to determine the best operating condition that gave product with highest AA conversion and acceptable colour. The best operating condition was achieved at a temperature of 200°C, SL/AA reactant ratio of 4:1 and catalyst loading of 0.5 wt%, with the corresponding AA conversion of 90.10%. The kinetic data was well fitted to the Langmuir Hinshelwood Hougen Watson (LHHW) model with the corresponding activation energy of 11.55 kJ/mol.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IOP Conference Series: Materials Science and Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
