Abstract
Solid waste derived clinker design methodology was established based on thermodynamic simulation and experiment validation via the recycling of incinerated sewage sludge ash (ISSA) and recycled concrete fine (RCF). Compared with 1000 °C and 1100 °C, 1200 °C was the optimum temperature for C2S-rich clinker synthesis due to the highest simulated belite content after sintering. A utilization rate of 95 % was achieved, accomplishing the maximization of solid waste recycling. Due to the CaCO3 phase formation by the reaction of high-content belite (46.8 %) with CO2, carbonated 1200ARS eco-cement showed higher compressive strength than OPC and other eco-cements. The lowest porosity (18.1 %) with dense microstructure was also obtained by carbonated 1200ARS. Benefiting from the high CO2 reactivity of belite, 1200ARS displayed the optimum CO2 sequestration capacity with a higher carbonation degree (30.1 %) than other batches, providing a promising direction for future development of the low-carbon cement industry to achieve environmental sustainability.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call