Abstract

In many places, sandy coastlines and their associated assets are at high risk of erosion and flooding, with this risk increasing under climate change and sea level rise. In this context, dynamic cobble berm revetments represent a potentially sustainable protection technique to armour sandy beaches, reduce wave runup and protect the hinterland against wave attack. However, the behaviour and performance of such structures is not well understood. The dynamic cobble berm revetment located in North Cove, WA, USA, was monitored over a spring tidal cycle in January 2019. A representative 60 m alongshore section was monitored over 10 days using 2D laser scanner (lidar) measurements, GPS ground elevation surveys, Radio Frequency Identification of individual cobbles and revetment thickness measurements. These data were used together to assess the dynamic behaviour and functionality of the revetment throughout the experiment. Over the course of the experiment, the surface elevation changed by up to ±0.5 m, and the revetment volume reduced by an average 0.67 m3/m. These changes were found to be caused by relatively large significant wave height and high water levels. The revetment demonstrated a dynamic stability and the capacity to quickly reshape under changing hydrodynamic conditions. The instrumented cobbles were transported along and cross-shore and accumulated at the toe of the revetment, but were never transported seaward of the toe. The revetment also managed to recover some of the lost volume under moderate wave conditions. The revetment behaviour was found to be influenced by variation in the cobble-sand matrix. The underlying sand dynamics – i.e., accumulation or removal of sand within the cobbles – were found to govern the overall volume changes and were important to the overall stability of the revetment. Seven possible transport regimes were identified, and a model of the internal sand dynamics was developed. During the spring tidal cycle measured here, the revetment protected the sand scarp immediately landward and prevented flooding of the hinterland, while armouring the underlying sand. Over time, renourishment will likely be required due to longshore sediment transport, and preliminary guidelines for this and other aspects of design are suggested.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.