Behavior Analysis of a Bucket Foundation with an Offshore Wind Turbine during the In-Water Sinking Process

Abstract

To enhance the safety of the in-water sinking operation for an integrated system, including a bucket foundation (BF), tower, and rotor nacelle assembly (RNA), in complex marine environmental conditions, a model test of in-water sinking for an offshore wind turbine and bucket foundation (OWT–BF) is conducted. The motion behavior of the OWT–BF and the sling tensions during the in-water sinking process are investigated, and the numerical method is validated through test results. The results demonstrate a positive correlation between the wave height and motion response of the OWT–BF. The most critical stage of the in-water sinking operation occurs when the top cover of the bucket is fully submerged, resulting from the substantial cross-sectional difference between the bucket base and the transition section. Furthermore, the closer the OWT–BF is to the seabed, the less it is affected by waves in terms of motion response. It is advisable to conduct the in-water sinking operation of the OWT–BF in sea states with wave heights below 1.5 m. Simultaneously, slings can efficiently control the motion response of the OWT–BF, thereby enhancing the safety of the sinking operation.