Bayesian probabilistic damage detection of a reinforced-concrete bridge column

Abstract

A Bayesian probabilistic approach for damage detection has been proposed for the continuous monitoring of civil structures (Sohn H, Law KH. Bayesian probabilistic approach for structure damage detection. Earthquake Engineering and Structural Dynamics 1997; 26:1259–1281). This paper describes the application of the Bayesian approach to predict the location of plastic hinge deformation using the experimental data obtained from the vibration tests of a reinforced-concrete bridge column. The column was statically pushed incrementally with lateral displacements until a plastic hinge is fully formed at the bottom portion of the column. Vibration tests were performed at different damage stages. The proposed damage detection method was able to locate the damaged region using a simplified analytical model and the modal parameters estimated from the vibration tests, although (1) only the first bending and first torsional modes were estimated from the experimental test data, (2) the locations where the accelerations were measured did not coincide with the degrees of freedom of the analytical model, and (3) there existed discrepancies between the undamaged test structure and the analytical model. The Bayesian framework was able to systematically update the damage probabilities when new test data became available. Better diagnosis was obtained by employing multiple data sets than just by using each test data set separately. Copyright © 2000 John Wiley & Sons, Ltd.