Abstract
The anticorrosion performance of an Epoxy-Mastic organic coating was evaluated during continuous immersion in saline solution using electrochemical impedance spectroscopy (EIS). The typical parameters of pore resistance and charge transfer resistance were determined employing an equivalent electric circuit. Constant phase elements (CPE) were used in order to determine fraction of water absorbed, mass diffusion, solubility and the swelling coefficients, as well as to predict the failure times of the coating. The results found by EIS measurements match very well with the high resistance to deterioration exhibited by the coating. It was also found that the excellent protection performance of the coating was mainly due to low water solubility and low permeability.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.