Abstract
This paper presents a bandwidth increasing technique using a modified ground plane with diagonal edges for the design of compact antennas. The proposed low-cost, compact-size circular patch antenna on 3 cm × 5.1 cm printed circuit board (FR-4) is designed and validated through simulations and experiments. Results show that with diagonal cuts at corners of the ground plane, the enhanced bandwidth can be tunable depending on the removed area. Return losses of minus 17 and minus 30 dBs for the first and second resonant frequencies, respectively, can be achieved when the depth of the diagonal cut is at optimum value of five mm, providing an 18.13% wider bandwidth (2.95–12.615 GHz) than the Federal Communication Commission (FCC) standard.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.