Abstract
AbstractModern power generation systems for wind turbines are often based on the rotor fed slip‐ring machines. Power electronics converter provides the slip power, and also the reactive power for excitation of the generator during standalone operation. This way the isolated load can be supplied even if the grid has failed. Stator voltage in an autonomous operation is controlled using vectorial phase locked loop (PLL) structure; therefore the information about mechanical speed or angular position of the rotor is eliminated from the control method. The second PLL is also used for synchronization of the generated voltage with the grid voltage. Voltages synchronization is necessary for soft connection and protection of the supplied load from the rapid change of the supply voltage phase. The grid‐connected doubly fed induction generator (DFIG) can be useful after grid fault; however, the mains outage detection methods are necessary for fast disconnection after grid failures. Copyright © 2008 John Wiley & Sons, Ltd.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.