Automatic motion probe setting assist system for cardiac magnetic resonance imaging

Abstract

Listen

Translate article

Background Planning assist systems for cardiac MR examinations are necessary for easier operation and shorter examination times. This is also true for motion probe setting in whole-heart MR imaging. In previous reports, we proposed an automatic planning assist system for couch adjustment, local shimming, and axial multislice imaging using single scout volume data of the chest. This system employs an atlas-based segmentation technique, so it can detect not only the heart region but also various anatomical structures in the chest. In the present study, this technique was employed to detect the position of the top of the right hemidiaphragm for motion probe setting. The results were also compared against the degree of interobserver error in manual annotation. Methods An ECG-non-gated 3D fast field echo (FFE) single volume covering the entire chest area was acquired using a 1.5-T MRI scanner (Excelart VantageTM powered by Atlas, Toshiba Medical Systems) during a single breathhold with TR/TE = 3.7/1.3, FOV = 500x350x350 mm3 (coronal slab), and readout/phase/slice encode steps = 256/64/35 in an acquisition time of approximately 9 seconds. The acquired volume was then transformed to match a prepared model volume with manual annotation of the heart region and the position of the top of the right hemidiaphragm, permitting the motion probe region of the input data to be located. Accuracy was assessed by measuring the Euclidean distance between the position of the top of the right hemidiaphragm obtained by our