Abstract
AbstractA fully automatic instrument has been developed to allow the on‐line measurement of activated sludge settling characteristics. The monitor uses the derived data to calculate final sedimentation tank solids loadings and the required rates of returned activated sludge pumping. The instrument has been developed by Thames Water Utilities Limited and is now manufactured under licence by Phox Systems Ltd. It samples mixed liquor and returned sludge alternately and measures solids concentration, the initial settling rate (or rate of hindered settlement) and the stirred specific volume index. The stirred specific volume index at a standard solids concentration of 3.5 g/l is derived from the data. Actual and maximum final sedimentation tank loadings (kg/m2h) are calculated, and the required returned sludge pumping rate is predicted and may be controlled by the monitor. Tests have been carried out on a number of sewage‐treatment works during several years of development, and some of the results are presented and discussed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
