Automated Weld Path Generation in Cluttered Environments Using Segmentation and Iterative Closest Point Workpiece Localization

Abstract

Abstract A significant amount of manufacturing is performed by small to medium enterprises (SMEs), but these manufacturers often have lower adoption rates of automation. The cost and complexity associated with traditional robot systems slow the adoption of robotic welding operations for SMEs. The recent increase in collaborative robotic welding systems is bridging the gap, however, by reducing the complexity of installing, maintaining, and training operators to perform weld operations with collaborative robotics. These systems add flexibility in the range of operator use and ease of deployment. These systems however still rely on kinematic registration between the robot-mounted torch and workpiece on any open-loop weld. This requires precise placement of the workpiece prior to performing a weld. This work will discuss a method for part identification and registration in a welding task as a step toward automated weld path generation. The method is based on lower-resolution 3D cameras (RGBD cameras) using a combination of color and depth information. This information is used to both identify the workpiece within a workspace that may have other, non-workpiece items, and then provide registration or localization information of the workpiece within a resolution that could allow follow-on near-position strategies to achieve final weld path identification.