Abstract
In this paper, we present a hybrid laser-plasma ablation method for material processing applications. For this purpose, a coaxial configuration consisting of a low-temperature atmospheric pressure argon plasma beam and a Nd:YAG-laser at a wavelength of 355 nm was used. Both pure laser ablation and hybrid laser-plasma ablation experiments were performed on aluminum at different laser energies and numbers of laser pulses. In the case of hybrid ablation, both the depth and volume ablation rates were increased significantly in comparison to pure laser ablation. This effect is described by a linear interrelationship of both the ablation rate and the particularly applied laser energy and is thus due to energetic synergies. Such behavior can be explained by the de-excitation of argon plasma species and an accompanying energy deposition at the generated debris and the sample surface. The energetic effect was found to abate with increasing ablation depth. However, considerable improvements in terms of ablation rate are achieved in the near-surface depth range of approx. 500 microns.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.