Atlantoaxial joint stabilization using patient-specific 3-D-printed drill guides and 3-D-printed titanium plates or polymethyl methacrylate is effective in toy-breed dogs.

Abstract

To report the clinical outcomes in toy-breed dogs with atlantoaxial instability (AAI) stabilized with patient-specific 3-D-printed titanium plates or polymethyl methacrylate (PMMA), both with the assistance of 3-D-printed drill guides. 15 client-owned dogs undergoing surgical treatment for AAI between January 1, 2020, and October 31, 2022. The clinical characteristics, diagnostic images, and neurological outcomes of 15 dogs treated for AAI using 3-D-printing technology were reviewed. Postoperative CT images were examined to evaluate the screw placement accuracy in the atlas and axis. Clinical outcomes, including postoperative neurological improvement and screw loosening, were evaluated in dogs treated with a patient-specific titanium plate and those treated with PMMA. Patient-specific titanium plates (7 dogs) and PMMA (8 dogs) were used for AAI stabilization. The mean follow-up period was 15.2 months (range 7 to 22 months). A reduction of the axis without vertebral canal violation was confirmed on postoperative CT in 14 dogs. The mean deviation from the preoperative planning ranged from 0.30 to 1.27 mm at the insertion and exit points of 84 screws using this method. The neurological grade had improved in each dog postoperatively and at the final follow-up. Screw loosening was noted in 4 dogs in the titanium plates groups without neurological deterioration. Patient-specific 3-D-printed drill guides and titanium plates or PMMA are effective for AAI stabilization in toy-breed dogs, providing accurate guidance.