Abstract

The object of research is the potential of secondary use of waste from the destruction of buildings and structures, which were formed as a result of the military aggression of the Russian Federation on the territory of Ukraine. For Ukraine, the issue of demolition waste is critical at the level of environmental safety and ensuring the demand for building materials for the reclamation of Ukraine according to the principles of the circular economy. To date, there are no official methods that would allow to determine the exact amount of destruction and the quality of the material formed, which complicates the development of mechanisms for its utilization in production. The key industry considered during the research for disposal of demolition waste is the industry of construction materials production. In the course of research, it was determined that most of the generated waste is waste from the destruction of buildings and structures made of precast concrete, however, considering that these wastes are generated by the action of explosions from shells. It is very difficult to ensure their compliance with the requirements of current standards due to the inclusion that such waste can contain. Therefore, the problem considered by this study is the determination of the nature of waste from the destruction of buildings and structures, their physical, mechanical and chemical characteristics, in the context of the final applications of products based on them. The results of the study showed that when reproducing the concrete mix for tared concrete for civil purposes, which do not have high requirements for stability in aggressive operating conditions, when replacing natural aggregate crushed to a fraction of 5 to 20 mm, the requirements for concrete strength are achieved in the level of C40/50 strength class. But the rheological characteristics deteriorate due to the high absorption of water from the concrete mixture by the studied material. Research has shown that for further use in the production of ready-mixed concrete and precast concrete products, it is necessary to prepare demolition waste with a wide particle size distribution and low dust content. This can ensure a high level of recycling and meet the demand for concrete in the reconstruction of Ukraine. The fine aggregate from the demolition waste crushing process can be considered as secondary cementitious material for cement production.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.