Abstract
Assessing the compatibility of industrial discharges with the biological process of a municipal wastewater treatment plant (WWTP) may represent a critical task. Indeed, either focusing only on chemical characterization or ecotoxicity tests designed to assess the impact on surface waters may lead to questionable or misleading conclusions. The feasibility of an industrial connection to the sewer should better take into account the features of the downstream WWTP, in particular by studying the potential effects on the biomass of that specific plant. With this aim, a multi-step experimental protocol applicable by water utilities has been proposed: (step 1) calculation of the flow rate/load ratio between industrial discharge (ID) and urban wastewater (WW); (step 2) analysis of the modified operating conditions of the biological stage; (step 3) experimental assessment of the impact of the ID on the WWTP biomass by means of respirometric tests. An application of this protocol is presented in this work as a case study, namely a new ID (average flowrate 200 m3 d−1) coming from an aqueous waste treatment plant (AWTP) to be connected to the public sewer. The integrated evaluation of results showed that no negative impacts could be expected on the downstream urban activated sludge WWTP (treating a flow rate of around 45,000 m3 d−1).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
