Abstract
Abstract The simultaneous measurement of current flow and suspended sediment concentration in the marine environment is central to the study of sediment transport processes. In view of this, two acoustic approaches for measuring flow were tested in a tidal estuary to assess their capabilities in this environment. A coherent Doppler velocity profiler and a cross-correlation velocity profiler were assessed using conventional current meters and a commercially available acoustic Doppler velocimeter. Mean velocity profiles were obtained up to a range of 1.47 m in 0.046-m range bins over a number of flood tides. The measurements compared well with the reference instruments and regression analysis produced gradients close to unity. Turbulent velocities measured with the coherent Doppler profiler were comparable with turbulent fluctuations measured with the acoustic Doppler velocimeter. The cross-correlation velocity profiler was shown to be unable to measure turbulent velocities. The backscattered signals received on the cross-correlation transducers were also used to compute the sediment concentration profiles using an explicit solution to the acoustic backscatter equation. Combining the concentration and flow measurements enabled sediment flux profiles to be obtained, the results of which compared favorably with flux measurements obtained from the conventional current meters and pumped sampling.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have