Abstract
Previous studies have not extensively explored the collective impact of lateral, axial, and thermal loading on the ultimate vertical bearing capacity of energy piles, qu. This study investigates qu values for energy piles in dry sandy and clayey soils under varying lateral loads and temperature conditions using numerical and analytical solutions, considering temperature-dependent variables. The numerical results were validated against experimental data. The analytical solution aligns well with numerical analyses, though it yields slightly higher qu values in sandy soil. Both numerical and analytical solutions show that cooling and heating can respectively increase and decrease qu under corresponding conditions. Numerical simulations indicate that in clay, lateral load enhances qu, with increases ranging from 8 % to 20 % across different thermomechanical conditions. In sand, the effect of lateral load depends on thermal conditions, increasing by 2 %–5 % during cooling and decreasing by 3 %–5 % during heating. The analytical solution showed that increasing lateral load would increase qu in sand by 0.5 %–2 % and in clay by 1 %–5 %, with a more significant increase in clay. Analytical and numerical parametric studies also revealed the higher influence of soil cohesion and pile diameter on qu values under different thermomechanical conditions.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call