Assessing groundwater quality in Nand Samand catchment, Rajasthan, India: a GIS-based multi indices approach for drinking and irrigation water suitability

Abstract

Abstract Consistently monitoring groundwater quality (GWQ) is essential to reduce the risk of geochemical contaminants and ensure its suitability for agriculture and human consumption. The current investigation aims to assess GW acceptability in the Nand Samand catchment (NSC), utilizing the water quality index (WQI) and irrigation water quality indices (IWQIs) for domestic and irrigation purposes. To achieve this, GW samples were collected from 95 open wells which were located spatially in the catchment, during the pre-monsoon (PRM) and post-monsoon (POM) seasons of 2019 and 2020, and subsequently analysed for 11 physico-chemical parameters. Electrical conductivity (EC) varied from 1.25 to 6.61 dS/m and 0.58 to 7.42 dS/m during the PRM and POM seasons, respectively. Total dissolved solids of the study area ranged between 180 and 1,180 (27%) to 1,180 and 2,180 (62%) during PRM 1,180 (63%) to 1,180–2,180 (31%) during POM, respectively. The study also computed the ‘sodium adsorption ratio’ (SAR) and ‘residual sodium carbonate’ (RSC) to estimate GW's appropriateness for agriculture, finding it suitable in most locations due to its balanced composition. Based on WQI, varying percentages of samples were classified as ‘good’ and ‘poor’ for potable water quality in both seasons.