Abstract

Cryopreservation of rainbow trout semen under field conditions was analyzed. Straw location over liquid nitrogen level is a crucial variable that affects freezing rate and fertilization yield due to changes in nitrogen vapor external temperature. The objectives were: to analyze cryopreservation protocols by experimentally measuring the cooling rates and fertilization yield of 0.5 ml plastic straws located in nitrogen vapor at different heights corresponding to different external temperatures; to numerically simulate the freezing process, by solving the heat transfer partial differential equations with the corresponding thermo-physical properties of the biological system and the plastic straw; to evaluate and analyze the surface heat transfer coefficient (h) during the freezing process of the straws; to introduce a new variable, the characteristic freezing time (tc), that enables comparison between protocols; this variable was defined as the elapsed period between the initial freezing temperature and a final reference temperature of −40 °C (temperature in which more than 80 % of the water is in a frozen state). The mathematical model predicted the temperature distribution inside the straw, showing a low effect of straw plastic materials (polyethylene-terephthalate glycol, polyvinyl-chloride, and polypropylene) on freezing rates. The average h value obtained from numerical simulations was 25.5 W/m2 K, close to that obtained from the analytical Nusselt correlation for natural convection. An improvement on fertilization trials was observed when the average external nitrogen temperature was −129.6 °C (temperature range: −94 to −171 °C) with an average tc of 56.8 s (ranging between 47 and 72 s). These results corresponded to a height above the level of liquid nitrogen of 2 cm. Comparison with literature reported data showed satisfactory results. Applying mathematical models in the cryobiology field achieved results that are relevant for cryopreservation activities.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call