Application of wire beam electrode technique to investigate the migrating behavior of corrosion inhibitors in mortar

Abstract

The migration rate and inhibitive effect on rebar corrosion of migrating corrosion inhibitors (MCIs) in mortar were studied using wire beam electrode technique with high temporal and spatial resolution. The MCIs readily diffused through the mortar but exhibited preferential adsorption on the bare metal surfaces rather than on the rust layer on rebars. The ingress of MCIs in mortar increased the resistance on general corrosion much more than localized corrosion. This increase was mainly attributed to the sealing effect on mortar pores (pore-blocking effect) rather than on chemical absorption.