Application of the Notch Stress Intensity and Crack Propagation Approaches to weld toe and root fatigue

Abstract

Several fatigue failures are initiating from the root of non-penetrating welds, which are widely applied in several industrial sectors. The structural optimization and reduction of weld material increase the danger of root cracking. The fatigue assessment during design is mainly based on the nominal, structural hot-spot or notch stress approach. These approaches are only partly applicable to weld roots, give rough estimates such as the nominal stress approach or over-conservative life estimation such as occasionally the notch stress approach when keyhole notches are modelled. An alternative assessment is possible with the crack propagation approach assuming the non-welded root gap and a short crack at the weld toe as initial cracks. A new approach is the notch stress intensity approach (N-SIF approach) which is able to assess the fatigue life of V-shaped notches at weld toes as well as crack-like notches at weld roots using the strain energy density around the notch. Both approaches are applied to different joints where toe and root failures are probable. The results are compared with a previous analysis using the notch stress approach. Fatigue test results are also available for a comparison which allows to draw conclusions with respect to the approaches for an appropriate fatigue strength assessment.