Application of the method of dynamic calibration for IMS stations in regions with lower seismic activity

Abstract

The Method of Dynamic Calibration (MDC) of stations of the International Monitoring System (IMS) was developed for calibrating regions where no underground nuclear explosions were carried out, with the purpose of providing conditions for implementation of the Comprehensive Nuclear-Test-Ban Treaty (CTBT) in nontrivial cases. Initially, the MDC had been presented in [Kedrov, 2001; Kedrov et al., 2001; Kedrov O.K. and Kedrov E.O., 2003] and then considered in detail in [Kedrov et al., 2008]. The core of MDC relates to adapting diagnostic parameters for the identification of underground nuclear explosions (UNE) and earthquakes elaborated for the region of Eurasia, taken as a basic region (BR), for other researched regions that differ from BR in the character of the attenuation of seismic waves. The unique characteristic of this method lies in the fact that calibration of diagnostic parameters with the help of attenuation coefficients bΔ at varied source-station traces is implemented using only natural seismicity data within the limits of an explored region and does not require special underground chemical explosions. The MDC algorithm is implemented in the research program ”Kalibr”, which was tested by using the experimental data from Eurasia region. It is shown in this work that MDC can be used for calibration of regions where a very low level of natural seismicity is observed. According to the results of the calibration of diagnostic parameters at IMS stations in several regions of North America, Africa, and Asia, the approximate classification of propagation conditions for seismic signals at source-station traces in platform and tectonically active regions is made. The results for the development of two research programs, “Spektr” and “Signal”, are presented; this software is intended for automation of calculation procedures for spectral diagnostic parameters of UNEs’ and earthquakes’ identification by amplitude spectra of P waves and by the maximal amplitudes of P, S, and LR signals. The application of these programs allowed us to accelerate the whole calibration procedure for a particular source-station trace using the ”Kalibr” program.