Application of Tetraethylsulfamide (TES) As a Cathode Additive in Cylindrical Cells

Abstract

Recently, sulfonamides have been shown to be promising electrolyte components due to their high chemical and electrochemical stability in lithium batteries [1, 2]. The electrolyte stability becomes critical when applying high voltage and/or utilizing Ni-rich layered oxides in high energy density lithium-ion batteries. Another approach to successful Ni-rich cathode performance is to develop a stable and effective cathode electrolyte interphase (CEI). Given the success of sultones and sulfates in this regard [3, 4], it is hypothesized that nitrogen analogs, like sulfonamides, could be tailored to provide a similar benefit. Indeed, Yim et al. [5, 6] have shown that N,N,N’,N’-tetraethylsulfamide (TES) forms a CEI on NMC811 that imparts high voltage cycling stability and less cathode corrosion. Our earlier studies of TES with Ni-rich NCA also formed a favorable CEI and these results are the topic of this presentation.Herein, we examine the performance of 0 - 4 wt.% TES in our commercially available, high power INR18650-P28A. These cells contain a composite SiO/graphite anode in addition to a Ni-rich cathode. As shown in Fig 1, TES significantly decreased the impedance of the cathode interface after conditioning compared to the control electrolyte. Thereafter, cells containing up to 2%TES show improved capacity retention during long-term high-rate cycling (+1C/-80W). Part of this success was due to a suppression of resistance growth during cycling by TES. Fast charge cycling (+3C/-2C), however, was moderately impaired with increased TES. Considering the largely reduced impedance of the cathode, fast-charge performance may have suffered due to anode rate limitations. These results will be discussed as well as gas generation, storage performance, and additional rate and cycling tests.[1] Shuting Feng, Mingjun Huang, Jessica R. Lamb, Wenxu Zhang, Ryoichi Tatara, Yirui Zhang, Yun Guang Zhu, Collin F. Perkinson, Jeremiah A. Johnson, Yang Shao-Horn. Chem, 5, 2630-2641 (2019)[2] Weijiang Xue, Mingjun Huang, Yutao Li, Yun Guang Zhu, Rui Gao, Xianghui Xiao, Wenxu Zhang, Sipei Li, Guiyin Xu, Yang Yu, Peng Li, Jeffrey Lopez, Daiwei Yu, Yanhao Dong, Weiwei Fan, Zhe Shi, Rui Xiong, Cheng-Jun Sun, Inhui Hwang, Wah-Keat Lee, Yang Shao-Horn, Jeremiah A. Johnson, Ju Li. Nature Energy, 6, 495-505 (2021)[3] Koji Abe, Manuel Colera, Kei Shimamoto, Masahide Kondo, Kazuhiro Miyoshi. Journal of Electrochemical Society, 161 (6) A863-A870 (2014)[4] Jian Xia, N. N. Sinha, L. P. Chen, J. R. Dahn. Journal of Electrochemical Society, 161 (3) A264-A274 (2014)[5] Kwangeun Jung, Taeeun Yim. Journal of Alloys and Compounds, 834,155155 (2020)[6] Ji Won Kim, Kwangeun Jung, Taeeun Yim. Journal of Mater. Sci & Tech. 86, 70-76 (2021) Figure 1