Abstract

The objective of this work was to assess the physical and mechanical properties of standing Taiwan incense cedar (Calocedrus formosana) using nondestructive techniques (NDT). In addition, the relationship between characteristics of standing trees and wood properties was established. Results indicated that the velocity values and bending properties decreased as tree height increased. In addition, velocity values of specimens were greater than those of logs and standing trees. After regressive analysis, the correlation coefficients (r) were 0.79 for standing trees and logs and 0.70 for logs and specimens. Not only the velocities measured by ultrasonic wave (Vu), tap tone (Vf), and vibration (Vt) methods, but dynamic MOE also correlated well with the static bending properties of specimens. In addition, the values of dynamic and static MOE showed the following trend: DMOEu > DMOEf > DMOEt > MOE. For all specimens, the r values were found to be 0.92 for MOE and DMOEt, and 0.75 for MOR and DMOEt. Therefore, it was assumed that the nondestructive testing methods can provide basic information about standing trees and specimens for future management practices and utilization of Taiwan incense cedar.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.