Application of Intercritical Austenitizing in a Commercial CMnSi Steel as a Tool for Optimizing a One‐Step Quenching and Partitioning Cycle Aiming to Achieve a Third‐Generation Advanced High‐Strength Steel

Abstract

Advanced high‐strength steels (AHSS) have been extensively studied to develop its third generation from relatively low‐cost alloys, but seeking optimized mechanical properties. In this context, the effects of quenching heat treatments are evaluated in this work after intercritical austenitizing (IA) on microstructure, alloying elements partitioning, and Ms temperature for a commercial CMnSi alloy. Applying dilatometric data and microstructural characterization, different heat cycles are evaluated. The obtained experimental results are compared with those ones obtained by computer simulations at equilibrium conditions. Based on this characterization, an optimized one‐step quenching and partitioning (Q&P) cycle (after IA) is proposed and applied to tensile test specimens. Then, the specimen microstructure is characterized by scanning and transmission electron microscopy as well as by X‐ray diffraction. Using the proposed methodology, it is possible to produce a Q&P steel with a product of tensile strength and elongation of 29.5 GPa% and a 7% volumetric fraction of retained austenite. It is concluded that the precise knowledge about the IA effects on the phase transformations and microstructure evolution in a commercial CMnSi alloy has great potential to be applied in defining a one‐step Q&P heat treatment that favors a multiphase microstructure, which meets mechanical properties requirements for a third‐generation AHSS.